Fujitsu Primergy RX100 S3 User Manual

255
PRIMERGY RX100 S3 User’s Guide
9
Operation and Maintenance
■ Starting Server Management Tools
 Before turning on this server, check that the floppy disk drive of the USB connection is connected.
 Before starting the system from the "Server Management Tools" disk, check to see that the "OS Boot
Monitoring" function of ServerView is disabled (default setting).
If the system is started with this function enabled, the server may automatically turn off or restart
improperly.
If the OS Boot Monitoring function is needed, it should be reset to enabled before resuming normal
server operation. For details of ServerView, refer to "ServerView User's Guide".
1 Turn on the server and insert the "Server Management Tools" disk into the
floppy disk drive.
The window for selecting a keyboard appears.
2 Select a keyboard.
Select "1" for the Japanese keyboard or "2" for the English keyboard.
The Japanese keyboard is selected by default.
3 Enter the following command and press the [Enter] key.
A:\SMT>IPMIVIEW.EXE
The IPMI Tool window appears.
 Only the following functions are supported by Server Management Tools:
• System Event Log (SEL)
• User Management
• LAN Configuration
Please select:
1 = JP keyboard
2 = US keyboard
Your selection
General Information
Temperature Information
Fan Information
Voltage Information
System Event Log (SEL)
FRU Information (ID Proms)
User Management
LAN Configuration
Server Management Control Settings
FUJITSU
SIEMENS
COMPUTERS
IPMI-Tool - Vx.xx
< > Select <ENTER> Start <ESC> Exit

Fujitsu Primergy RX100 S3 Specifications

General

Brand	Fujitsu
Model	Primergy RX100 S3
Category	Server
Language	English