Operating Manual TX150 S6
Contents
4.4 Connecting devices to the server . . . . . . . . . . . . . . . 60
4.5 Connecting the server to the mains . . . . . . . . . . . . . . 61
4.6 Notes on connecting/disconnecting cables . . . . . . . . . . 63
5 Starting up and operation . . . . . . . . . . . . . . . . . . . . 65
5.1 Access to drives (floorstand model) . . . . . . . . . . . . . . 65
5.2 Controls and indicators . . . . . . . . . . . . . . . . . . . . . 67
5.2.1 Front of server . . . . . . . . . . . . . . . . . . . . . . . . . . 67
5.2.2 Rear of server . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
5.3 Switching the server on and off . . . . . . . . . . . . . . . . 76
5.4 Configuring the server . . . . . . . . . . . . . . . . . . . . . 78
5.4.1 Configuring the onboard SATA controller . . . . . . . . . . . . . 78
5.4.2 Configuring the PCI SAS controller with "Integrated Mirroring
Enhanced" . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
5.4.3 Configuring the PCI SAS controller with RAID functionality . . . 79
5.4.4 Configuration with ServerStart . . . . . . . . . . . . . . . . . . 79
5.4.5 Configuration without ServerStart . . . . . . . . . . . . . . . . 80
5.5 Cleaning the server . . . . . . . . . . . . . . . . . . . . . . . 81
6 Property and data protection . . . . . . . . . . . . . . . . . . 83
6.1 Mechanical access protection . . . . . . . . . . . . . . . . . 83
6.2 BIOS Setup security functions . . . . . . . . . . . . . . . . . 83
7 Troubleshooting and tips . . . . . . . . . . . . . . . . . . . . 85
7.1 Power-on indicator remains unlit . . . . . . . . . . . . . . . . 85
7.2 Server switches itself off . . . . . . . . . . . . . . . . . . . . 86
7.3 Screen remains blank . . . . . . . . . . . . . . . . . . . . . . 86
7.4 Flickering stripes on monitor screen . . . . . . . . . . . . . 87
7.5 No screen display or display drifts . . . . . . . . . . . . . . . 87
7.6 No mouse pointer displayed on screen . . . . . . . . . . . . 88
7.7 Unable to read from / write to floppy disk . . . . . . . . . . . 88