Fujitsu primergy TX150 - Page 102

102
Chapter 3 OS Installation Using ServerStart
■ Starting Installation
1 On the PXE server, start up ServerStart.
If ServerStart has already been started, you do not have to restart it. If it is not started, click
[Start] → [Programs] → [Fujitsu ServerStart] → [ServerStart].
The [Welcome to ServerStart] window appears.
2 Click [Click here to prepare an operating system installation for a PRIMERGY
Server].
The [Select an Operating System] window appears.
3 Click [Microsoft Windows Server Operating System -Preparing and/or initiating
a Remote Installation].
The [Microsoft Windows Operating System Installation] window appears.
4 Click the OS to install.
The [Preparing the Installation] window appears.
If a configuration file has already been created, go to Step 6.
5 Set items in wizards to create a configuration file.
Refer to "3.2.2 Configure Settings in Wizards" (Jpg.78). Set items in wizards and save the
configuration file.
Exiting a wizard returns to the preconfiguration mode window.
6 Click [Click here to initiate the Remote Installation Process].
The [Remote Installation Target Server] window appears.