Fujitsu primergy TX150 User Manual

17
PRIMERGY TX150 S4 User’s Guide
1
Overview
● Supported OS
Using ServerStart V5.603, the following OSs can be installed.
• Microsoft
®
Windows Server
™
2003, Standard Edition
• Microsoft
®
Windows Server
™
2003, Enterprise Edition
• Microsoft
®
Windows Server
™
2003, Standard x64 Edition
• Microsoft
®
Windows Server
™
2003, Enterprise x64Edition
• Microsoft
®
Windows Server
™
2003 R2, Standard Edition
• Microsoft
®
Windows Server
™
2003 R2, Enterprise Edition
• Microsoft
®
Windows Server
™
2003 R2, Standard x64 Edition
• Microsoft
®
Windows Server
™
2003 R2, Enterprise x64 Edition
• Microsoft
®
Windows
®
2000 Server
• Microsoft
®
Windows
®
2000 Advanced Server
` ServerStart does not support to install SBS 2003 or Linux.
` The OS which is not supported by the server cannot be installed.
● Configuration File (SerStartBatch.ini)
A configuration file stores the server setup information configured in ServerStart. To create a
configuration file, use the ServerStart floppy disk supplied with this server. Store only one file on each
floppy disk. Do not set the ServerStart floppy disk to the write-protected state.
You can use any name for the configuration file. However, the file must be installed in the server as
"SerStartBatch.ini". When installing the configuration file, make sure to save it as "SerStartBatch.ini" on
the ServerStart floppy disk.
Start up ServerStart, insert the ServerStart floppy disk containing "SerStartBatch.ini", and click [Start] to
install the server.

Fujitsu primergy TX150 Specifications

General

Brand	Fujitsu
Model	primergy TX150
Category	Server
Language	English