64
Chapter 3 OS Installation Using ServerStart
■ Installation While Maintaining the Established RAID Environment
1 Select [Logical Drive View] on the [Configuration for Disks and RAID
Controllers] window.
Add a partition
1. Click [Add Partition].
A partition is added.
Add required partitions.
2. Click [Details] and modify the settings as necessary.
The partition configuration is displayed. As the default values are configured, confirm the
settings and modify them as necessary.
` Partition size of the FAT file system
When "FAT" is selected in [File system] and a value equal to or more than 4090MB or "Auto-
matic setting" is specified in [Partition size], the size of created partitions will be 4090MB.
` The following limits apply to the volume label length. A volume label longer than the limit may
be used. However, it can cause installation failure. Enter a volume label within the limit.
•FAT: Up to 11 characters
•NTFS: Up to 32 characters
To Next Page
Loading...
Need help?
General