Fujitsu ScanSnap iX1600 User Manual

a The ScanSnap is connected to a computer via wireless LAN and the ScanSnap
Manager icon changes to .
When the ScanSnap and a computer are connected via wireless LAN, a
notification informs you of the communication status.
- When connecting the ScanSnap to a computer via the USB cable
l Unplug the USB cable, then plug it back in.
Make sure to leave at least 5 seconds between unplugging and plugging the cable.
l Restart ScanSnap Manager.
l Turn off the ScanSnap and then turn it on again.
Make sure to leave at least 5 seconds between turning off and on the ScanSnap.
l The following screen appears on the touch panel, until a connection is established with a
computer that has a user name selected in the [Selecting a User] screen.
a The computer that has a user name selected in the [Selecting a User] screen is connected
to the ScanSnap and the ScanSnap is ready for use.
In addition, the user name displayed in the upper left of the home screen on the touch
panel is changed to the user name that was selected in the [Selecting a User] screen.
a After the change, the connection between the ScanSnap and the computer with the
previously connected user name is disconnected.
On the disconnected computer, the ScanSnap Manager icon in the notification area
changes from
to with a message displayed, indicating that the connection with
the ScanSnap is disconnected.
HINT
l When the ScanSnap and a computer are connected, a notification informs you of the
communication status.
l When the ScanSnap and a computer are disconnected, a notification informs you of the
communication status.
l To disable a notification that appears when the connection between the ScanSnap and the
computer is disconnected, change the setting in the following procedure:
1. Right-click the ScanSnap Manager icon
in the notification area and select
[Preferences] from the "Right-Click Menu" (page 87).
a The [ScanSnap Manager - Preferences] window appears.
Changing a Connected Computer to a Computer That You Want to Connect to the ScanSnap from the Touch Panel (iX1600 / iX1500)
173

Fujitsu ScanSnap iX1600 Specifications

General

Letter	Yes
Card thickness (max)	0.76 mm
ISO A-series sizes (A0...A9)	A3, A4, A5
ISO B-series sizes (B0...B9)	B4, B5, B6
Scanning media types supported	Business Card, Post Card(JPN)
Maximum ISO A-series paper size	A4
Auto Document Feeder (ADF) media weight	0 - 80 g/m²
Maximum scan size	216 x 360 mm
ADF scan speed (b/w, A4)	600 ppm
Optical scanning resolution	600 x 600 DPI
USB version	2.0/3.2 Gen 1 (3.1 Gen 1)
USB connector type	USB Type-B
Input voltage	100 - 240 V
Power supply type	AC
AC input frequency	50 - 60 Hz
Quantity per pack	1 pc(s)
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Display	TFT
Scanner type	ADF + Manual feed scanner
Product color	Black
Display diagonal	4.3 \
Sensor type	Colour CIS
Scan drivers	ISIS, ScanSnap, TWAIN
Scan file formats	JPG, PDF
Daily duty cycle (max)	- pages
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	CE, RoHS
Standard input capacity	50 sheets
Sustainability certificates	ENERGY STAR, RoHS

Weight and Dimensions

Depth	161 mm
Width	292 mm
Height	152 mm
Weight	3400 g