EasyManuals Logo

Fujitsu ScanSnap iX1600 User Manual

Fujitsu ScanSnap iX1600
514 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #496 background imageLoading...
Page #496 background image
Updating the Firmware (iX1600 / iX1500)
Update the ScanSnap firmware to add new features or improve features and operational
performance.
If the ScanSnap is connected to the Internet, the firmware can be updated on the touch panel of the
ScanSnap.
l "To check the latest information on the firmware" (page 496)
l "To update the firmware" (page 496)
To check the latest information on the firmware
Checking the latest information on the firmware in advance allows you to decide whether or not the
firmware needs to be updated.
l iX1600
For the latest information on the firmware, refer to here.
l iX1500
For the latest information on the firmware, refer to here.
To update the firmware
ATTENTION
l Do not perform the following operations while updating the firmware. Otherwise, the firmware data
may be corrupted.
- Turning off the ScanSnap
- Disconnecting the ScanSnap from the Internet by turning off the wireless access point or
changing the settings
HINT
l If you use the software related to the ScanSnap, apply the latest updates to the software as well.
For details, refer to "Updating the Software" (page 495).
1. Press
in the home screen on the touch panel of the ScanSnap to display the [Settings]
screen.
2. Press to display the [Maintenance] screen.
3. Press [Update firmware] to display the [Update firmware] screen.
If [Unknown] is displayed for the latest version for [Latest version/Current version], check
whether the ScanSnap is connected to the Internet.
4. Press the [Update] button.
a Updating the firmware starts.
Updating the Firmware (iX1600 / iX1500)
496

Table of Contents

Other manuals for Fujitsu ScanSnap iX1600

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu ScanSnap iX1600 and is the answer not in the manual?

Fujitsu ScanSnap iX1600 Specifications

General IconGeneral
LetterYes
Card thickness (max)0.76 mm
ISO A-series sizes (A0...A9)A3, A4, A5
ISO B-series sizes (B0...B9)B4, B5, B6
Scanning media types supportedBusiness Card, Post Card(JPN)
Maximum ISO A-series paper sizeA4
Auto Document Feeder (ADF) media weight0 - 80 g/m²
Maximum scan size216 x 360 mm
ADF scan speed (b/w, A4)600 ppm
Optical scanning resolution600 x 600 DPI
USB version2.0/3.2 Gen 1 (3.1 Gen 1)
USB connector typeUSB Type-B
Input voltage100 - 240 V
Power supply typeAC
AC input frequency50 - 60 Hz
Quantity per pack1 pc(s)
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
DisplayTFT
Scanner typeADF + Manual feed scanner
Product colorBlack
Display diagonal4.3 \
Sensor typeColour CIS
Scan driversISIS, ScanSnap, TWAIN
Scan file formatsJPG, PDF
Daily duty cycle (max)- pages
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)20 - 80 %
CertificationCE, RoHS
Standard input capacity50 sheets
Sustainability certificatesENERGY STAR, RoHS
Weight and Dimensions IconWeight and Dimensions
Depth161 mm
Width292 mm
Height152 mm
Weight3400 g

Related product manuals