Fujitsu ScanSnap iX1600 User Manual

Checking Whether a Setting for the ScanSnap Has Been
Changed or Not (iX1600 / iX1500)
If the setting for [Display of profiles] on the ScanSnap is changed to [All users] or [Connected user],
establishing a connection with the ScanSnap may fail or another problem may occur.
Reset the setting for [Display of profiles] on the ScanSnap to [Selected user] and connect the
ScanSnap to the computer again.
1. Check the setting for [Display of profiles] on the ScanSnap and change it if
needed.
1.
Press in the home screen on the touch panel of the ScanSnap to display the
[Settings] screen.
2.
Press to display the [Scanner settings] screen.
3. Press [Display of profiles] to display the [Display of profiles] screen.
4. If [All users] or [Connected user] is selected, change it to [Selected user].
HINT
l If [All users] is set for [Display of profiles] and the ScanSnap and the computer are
connected via the USB cable, unplug the USB cable, then plug it back in. Once the USB
cable is plugged back in, the setting for [Display of profiles] is changed to [Selected user],
and the connection between the ScanSnap and the computer is established. Make sure
to leave at least 5 seconds between unplugging and plugging the cable.
l When you also use ScanSnap Home to operate the ScanSnap, ScanSnap Home shows
a message indicating that the setting for [Display of profiles] has been changed to
[Selected user].
5. Press to return to the home screen.
2. When connecting the ScanSnap to a computer via wireless LAN, establish a
connection in the following procedure.
1.
Right-click the ScanSnap Manager icon
in the notification area located at the far right
of the taskbar and select [Connect by Wi-Fi] from the "Right-Click Menu" (page 87).
a The [ScanSnap Manager - Connect by Wi-Fi] window appears.
2. From the list of the ScanSnap units to be connected, select the ScanSnap that you want to
connect, and click the [Connect] button.
Troubleshooting When You Cannot Connect to the ScanSnap (iX1600 / iX1500)
177

Fujitsu ScanSnap iX1600 Specifications

General

Letter	Yes
Card thickness (max)	0.76 mm
ISO A-series sizes (A0...A9)	A3, A4, A5
ISO B-series sizes (B0...B9)	B4, B5, B6
Scanning media types supported	Business Card, Post Card(JPN)
Maximum ISO A-series paper size	A4
Auto Document Feeder (ADF) media weight	0 - 80 g/m²
Maximum scan size	216 x 360 mm
ADF scan speed (b/w, A4)	600 ppm
Optical scanning resolution	600 x 600 DPI
USB version	2.0/3.2 Gen 1 (3.1 Gen 1)
USB connector type	USB Type-B
Input voltage	100 - 240 V
Power supply type	AC
AC input frequency	50 - 60 Hz
Quantity per pack	1 pc(s)
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Display	TFT
Scanner type	ADF + Manual feed scanner
Product color	Black
Display diagonal	4.3 \
Sensor type	Colour CIS
Scan drivers	ISIS, ScanSnap, TWAIN
Scan file formats	JPG, PDF
Daily duty cycle (max)	- pages
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	CE, RoHS
Standard input capacity	50 sheets
Sustainability certificates	ENERGY STAR, RoHS

Weight and Dimensions

Depth	161 mm
Width	292 mm
Height	152 mm
Weight	3400 g