EasyManuals Logo

Fujitsu ScanSnap iX1600 User Manual

Fujitsu ScanSnap iX1600
514 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #471 background imageLoading...
Page #471 background image
Replacing Consumables for iX1600 / iX1500 / iX1400
The Roller Set consists of the brake roller and pick roller.
Replace the consumable (Roller Set) of the ScanSnap when the replacement cycle is reached.
The following shows the suggested replacement cycles.
l Every 200,000 sheets scanned
For iX1600/iX1500, note that a notification (
) appears on the touch panel when the number
of sheets scanned reaches 200,000.
l Every one year of use
Replace the consumable when either the number of sheets scanned or the period of use
reaches the suggested replacement cycle.
Replace each roller in the following procedure:
l Before replacing consumables, you must turn off the ScanSnap and unplug
the power cable from the AC outlet. Not doing so may cause fire or electrical
shock.
l Do not place internal parts such as the brake roller and the pick roller within
reach of small children. Doing so may cause injury.
ATTENTION
The bottom part of the ScanSnap may become hot when the ScanSnap is being used but this does not
affect ScanSnap operation or cause any physical harm. Be careful not to drop the ScanSnap when
carrying it.
1. Unplug the power cable from the AC outlet.
2. Remove any documents from the ADF paper chute (cover).
3. Remove the Receipt Guide if it is attached.
You can remove the Receipt Guide by holding it with one hand and pulling it.
Example: iX1600
Replacing Consumables for iX1600 / iX1500 / iX1400
471

Table of Contents

Other manuals for Fujitsu ScanSnap iX1600

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu ScanSnap iX1600 and is the answer not in the manual?

Fujitsu ScanSnap iX1600 Specifications

General IconGeneral
LetterYes
Card thickness (max)0.76 mm
ISO A-series sizes (A0...A9)A3, A4, A5
ISO B-series sizes (B0...B9)B4, B5, B6
Scanning media types supportedBusiness Card, Post Card(JPN)
Maximum ISO A-series paper sizeA4
Auto Document Feeder (ADF) media weight0 - 80 g/m²
Maximum scan size216 x 360 mm
ADF scan speed (b/w, A4)600 ppm
Optical scanning resolution600 x 600 DPI
USB version2.0/3.2 Gen 1 (3.1 Gen 1)
USB connector typeUSB Type-B
Input voltage100 - 240 V
Power supply typeAC
AC input frequency50 - 60 Hz
Quantity per pack1 pc(s)
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
DisplayTFT
Scanner typeADF + Manual feed scanner
Product colorBlack
Display diagonal4.3 \
Sensor typeColour CIS
Scan driversISIS, ScanSnap, TWAIN
Scan file formatsJPG, PDF
Daily duty cycle (max)- pages
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)20 - 80 %
CertificationCE, RoHS
Standard input capacity50 sheets
Sustainability certificatesENERGY STAR, RoHS
Weight and Dimensions IconWeight and Dimensions
Depth161 mm
Width292 mm
Height152 mm
Weight3400 g

Related product manuals