Fujitsu ScanSnap iX1600 User Manual

Connecting the ScanSnap via Wireless LAN
You can connect the ScanSnap and a computer or mobile device via wireless LAN.
To connect them, you can use either the Access Point Connect mode in which a wireless access
point is used for connection or the Direct Connect mode in which a computer or mobile device is
directly connected to the ScanSnap. Select a suitable connection mode depending on whether there
is wireless LAN in a place where you use the ScanSnap or not.
To configure the wireless settings for the ScanSnap, use the ScanSnap Wireless Setup Tool, which
is installed together with ScanSnap Manager.
For details, refer to "Connecting the ScanSnap via Wireless LAN (iX500/iX100)" (page 129).
l Access Point Connect mode
l Direct Connect mode
What You Can Do with the ScanSnap
60

Fujitsu ScanSnap iX1600 Specifications

General

Letter	Yes
Card thickness (max)	0.76 mm
ISO A-series sizes (A0...A9)	A3, A4, A5
ISO B-series sizes (B0...B9)	B4, B5, B6
Scanning media types supported	Business Card, Post Card(JPN)
Maximum ISO A-series paper size	A4
Auto Document Feeder (ADF) media weight	0 - 80 g/m²
Maximum scan size	216 x 360 mm
ADF scan speed (b/w, A4)	600 ppm
Optical scanning resolution	600 x 600 DPI
USB version	2.0/3.2 Gen 1 (3.1 Gen 1)
USB connector type	USB Type-B
Input voltage	100 - 240 V
Power supply type	AC
AC input frequency	50 - 60 Hz
Quantity per pack	1 pc(s)
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Display	TFT
Scanner type	ADF + Manual feed scanner
Product color	Black
Display diagonal	4.3 \
Sensor type	Colour CIS
Scan drivers	ISIS, ScanSnap, TWAIN
Scan file formats	JPG, PDF
Daily duty cycle (max)	- pages
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	CE, RoHS
Standard input capacity	50 sheets
Sustainability certificates	ENERGY STAR, RoHS

Weight and Dimensions

Depth	161 mm
Width	292 mm
Height	152 mm
Weight	3400 g