Furuno NX-700B - Page 101

7.1 Self Test
7-9
Output Test Results
11. If any key other than the power key is pressed, the results of the Factory Test are
outputted to the printer.
Output Test Results
Connect PC.
Hit any key to send.
Related information:
The factory test results are displayed by selecting “System Test Results” in the
Initialize1 menu.
Fig. 7.1.3 Example: Printing of Output Test Result
Turn off power
12. Turn off the power if the screen shows the message “Turn off power”.
Prints the result of
j
udgment of Pass or Fail b
y
factory inspector.
Automatically prints the
test result.
Prints the result of the
Loopback test.
Printing test of printer