Furuno NX-700B - Setting of Initialize-1 Menu; Delete All Msgs; All Clear; Demo Mode

2.6 Setting of Initialize-1 menu
2-25
2.6 Setting of Initialize-1 menu
The contents of the Service menu is same for the programs Ver-01.02 and Ver-02.01.
1. Delete All Msgs
See page 7-15 for details.
2. All Clear
See page 7-15 for details.
3. Demo Mode (On/Off)
This is the setting intended for the purpose of demonstration at the exhibition, etc.
The DEMO mode icon is displayed on the top of the screen to show that it is in
the DEMO mode.
In the DEMO mode,
1) Even after the power is turned off, the DEMO mode is retained. The status of the
mode is stored in the EEPROM.
2) When the DEMO mode is set to ON or OFF, all the received messages are
cleared.
3) The position data and Date/Time data are not needed. The following data are set.
- Position data : 12 deg. 34 min. 000N/123 deg. 45 min. 000
- SOG/COG : 1.6 kt/56.0 deg, Automatically variable
- Date /Time : 2005/JAN/01 00:00:00
4. System Test Results
See page 7-12 for details.
5. View Nav Data
See page 7-12 for details.
518
GD33
I IL1 DEMO
JAN 01 00:01
ERROR RATE=0.7%
002/005
DEMO mode display