Furuno NX-700B - Chapter 4. Menu Tree; User Menu Tree 4.1.1 Program Ver-01.02

4.1 User Menu Tree
4-1
The menu tree differs according to the program versions.
- Ver-01.02 : Comply with IEC Standard
- Ver-02.01 : Comply with Russian type approval
4.1 User Menu Tree
4.1.1 Program Ver-01.02
Chapter 4. Menu Tree
[MENU/ESC]
Receive Mode (INS, Auto, Manual)
Local Channel (490kHz, 4209.5kHz)
Auto Print (Off, All, User Select)
Rcv Station & Msg
User Select Station & Msg
NAVTEX
Warn Msg Alm (Off, On)
Signal Monitor (Off, Int’l, Local)
Key Beep (Off, On)
Time Offset (-13:30
+13:30; 0:00)
Units (nm, kt, km, km/h, mi, mi/h)
Printer (None
*
, NX-700A, Upright, Inverted)
System
Scrolling (Slow, Fast, Skip To $$)
Font Size (Small, Medium, Large)
Time Display (24hour, 12hour)
Date Display (MMM DD YYYY, DD MMM YYYY, YYYY MMM DD)
User Display (Off, Nav Data, Distance)
Speed Display (SOG, STW)
Contrast (0
9; 5)
Display
INS Input Speed (4800, 9600, 19200, 38400bps)
INS Output Speed (4800, 9600, 19200, 38400bps)
Print Header (Off, On)
Edit Station List
Default Setting
Test
Rcv Monitor
Service
All Messages
Alarm Messages
User Selected Messages
Good Messages
Lock Message
[LIST]
Print
Cancel Print
[PRINT]
*In factory setting