Furuno NX-700B - Speed Display; Contrast; User Select Station & Msg (Ver-02.01)

2.4 Setting of Display menu
2-22
Related setting:
[MENU] -> Display -> Time Display
[MENU] -> Display -> Date Display
[MENU] -> System -> Unit
6. Speed Display (SOG/STW)
This is the setting of the ship speed type of the Nav data display at the bottom of the
received message screen.
- SOG: Speed over ground (VTG > VBW > RMC)
- STW: Speed through the water (VHW > VBW)
Related setting:
[MENU] -> Display -> User Display
[MENU] -> System -> Unit
7. Contrast (5, 0 – 5)
This is the contrast of the LCD screen setting.
This is set by the [←] and [→] keys with the bar graph displayed, not by numeric input.
When the NX-700A/B is turned on again after this is set to “0”, the setting is
automatically reset to the default “5”.
8. User Select Station & Msg (Ver-02.01)
This is the setting of the receiving station displayed in “User Selected Messages” which
is displayed when the [LIST] key is pressed. See page 2-15 for details.
Contrast (0 -9)
5