Furuno NX-700B - Fill Memory; Rcv Mon + NMEA Test; Serviceman Test; Tests in Initialize-2 Menu

7.3 Test in Initialize-1 and Initialize-2 menus
7-14
7.3.2 Tests in Initialize-2 menu
1. Serviceman Test
See page 7-5 for details.
2. Fill Memory
This test is used for the Type approval test.
When “Fill Memory” is executed, the memory area of messages is 100 % filled.
Do not carry out this test on board. All the received messages are deleted.
If this test is performed, currently stored received messages are all deleted and 200 test
messages including 500 characters are stored for 518 kHz and currently selected local
frequency (490 kHz or 4209.5 kHz), respectively.
After completing this test, clear test messages by executing “[MENU] -> Initialize1 ->
Delete All Msgs”.
3. Rcv Mon + NMEA Test
This test is used for the Type approval test.
Rcv Mon and NMEA Loopback Test are performed. “Rcv Mon” is the same test as
described in page 7-10.
In the NMEA Test, NMEA data inputted from #4 (RD-A) and #5 (RD-B) terminals of
J402 (WAGO) of the INS port on NX-7001 are outputted to #1 (TD-A) and #2 (TD-B)
terminals of J402 as they are.
518
ERROR RATE= 0.0%
200 MESSAGE
AUG 25 2005 19:40:00 AUG 25 2005 19:40:40
SOG 11.2 kt COG 45.8
[MENU] MENU
[LIST] LIST MENU [PRINT] PRINT MENU
[ ][ ] CHANGE FREQ
[ ][ ] SCROLL
[ENT] SHOW MESSAGE
135 20. 123’ E
45 40. 001’ N
200 RZ02 AUG 25 19 : 35
199 QY01 AUG 25 19 : 35
198 PX99 AUG 25 19 : 35
197 OW98 AUG 25 19 : 35
196 NV97 AUG 25 19 : 35
194 LT95 AUG 25 19 : 35
!!
NEW
NEW
NEW
NEW
NEW
NEW
518
200 /200
SOG 11.2 kt COG 45.8
[MENU] MENU
[LIST] LIST MENU [PRINT] PRINT MENU
[ ][ ] CHANGE FREQ
[ ][ ] SCROLL
[ENT] SHOW MESSAGE
135 20. 123’ E
45 40. 001’ N
GD65
AUG 25 19:35
ZCZC JZ02
xxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxx
[ENT]
I I
ALL MESSAGE