2.2 Setting of NAVTEX menu
2-13
2.2.2 Ver-01.02
1. Receiver Mode (INS/Auto/Manual)
This is the setting of operation mode of the NX-700A/B.
INS
Select “INS” for setting the local frequency, receiving stations and message types by
the NMK sentence from the INS.
When set to “INS”,
- The setting item of [MENU] -> NAVTEX -> Local Channel is not displayed.
- “Station” and “Message” cannot be selected in [MENU] -> NAVTEX -> Rcv
Station & Msg. “Station” and “Message” displayed on the screen are the those
set from the INS.
Auto
This is the setting of On/Off of the Auto mode. See page 1-6 for details.
When set to “Auto”, “Station” cannot be selected in [MENU] -> NAVTEX -> Rcv
Station & Msg although “Message” is selectable. Receivable stations alone are
displayed on the screen.
Manual
Receiving stations are selected manually.
When set to “Manual”, set “Station” and “Message” in [MENU] -> NAVTEX -> Rcv
Station & Msg.
[518]
Station
ABCDEFGHIJKLMNOPQRSTUVWXYZ
Message
ABCDEFGHIJKLMNOPQRSTUVWXYZ
[490] (or [4209.5])
Station
ABCDEFGHIJKLMNOPQRSTUVWXYZ
Message
ABCDEFGHIJKLMNOPQRSTUVWXYZ
Rcv Station & Msg
[ ] [ ] MOVE
[ENT] EDIT [MENU] RETURN TO MENU
[Manual]
To Next Page
Loading...
