2.7 Setting of Initialize-2 menu
2-30
8. Russia Mode (On/Off)
This item is added in the program Ver-02.01. When this is set to “On”, the functions are
changed to comply with Russia Type approval.
Item Russia Mode On (Russia) Russia Mode Off (IEC)
Operation of the status
display icon on the received
message screen.
[I]: Int’l Frq.
[L1], [L2]: Local Frq.
1. Stand by for reception:
The icon of set frequency is
displayed.
2. In the course of receiving
message:
The icon of the receiving
frequency blinks.
In the course of receiving
message:
The icon of the receiving
frequency blinks.
Processing when “ZCZC
ID” is detected before
detecting “NNNN” in one
message.
A part after “ZCZC ID” is
regarded as another message and
two messages are saved.
A part up till “NNNN” is
detected is regarded as one
message.
Time for determining the
receiving error rate
Receiving stops if the error rate is
33 % or more in 5 sec.
Receiving stops if the error
rate is 33 % or more in 30 sec.
Setting of Initialize1 -> 00
Msg Priority
Fixed to B1 > 00 > B2
B1 > 00 > B2, 00 > B1 > B2
selectable
Printing of message
received at 490 kHz or
4209.5 kHz while a
message is being received
at 518 kHz.
Printing of message received at
490 kHz or 4209.5 kHz is
deferred until receiving and
printing of the message at 518
kHz is complete.
Printing is performed
promptly.
To Next Page
Loading...
