Furuno NX-700B - User Display

1.2 Operation Guide
1-10
ZCZC AB11
THIS IS xxxx
xx-xx N, xxx-xx E
yy-yy N, yyy-yy E
NNNN
Own ship
xx-xx N, xxx-xx E
yy-yy N, yyy-yy E
Distance
2. User display
This display is intended as information so that
a user can make a judgment as to whether the
received message is relevant to the own ship,
on the basis of the own ship position and the
position information included in the received
message.
For instance, if the position data of X and Y is
included in the received message, the distance
to X is calculated since the position X is nearer
to the own ship position than the position Y.
Fig. 1.2.7 Distance display
518
ALL MESSAGE
x MESSAGE
MAY 07 2005 00:00:18
SOG 11.2 kt COG 45.8
[MENU] MENU
[LIST] LIST MENU [PRINT] PRINT MENU
[ ][ ] CHANGE FREQ
[ ][ ] SCROLL
[ENT] SHOW MESSAGE
135 20. 123’ E
45 40. 001’ N
Position data display
R
elated settin
g
:
Select [MENU] -> Display ->
User Display -> Nav Data
(GNS > GGA > RMC > GLL)
SOG/COG data display
R
elated se
t
ting:
- Select [MENU] -> Display -> User Display ->
Nav Data
- Select [MENU] -> Display -> Speed display ->
SOG, STW
(SOG: VTG > VBW > RMC)
(STW: VHW > VBW)
(COG: VTG > RMC)
- [MENU] -> System -> Unit
Date & Time display
R
elated settin
g
:
Select [MENU] -> Display ->
User Display -> Nav Data
(ZDA data is displayed.)
518
ALL MESSAGE
x MESSAGE
DISTANCE 123.4 nm
[MENU] MENU
[LIST] LIST MENU [PRINT] PRINT MENU
[ ][ ] CHANGE FREQ
[ ][ ] SCROLL
Distance display
Shows the distance between the own ship
position and the position of the position data
(N, S/ E, W) included in the selected received
message.
R
elated settin
g
:
- Select [MENU] -> Display -> User Display ->
Distance
- [MENU] -> System -> Unit
Fig. 1.2.6 Nav Data display