5.3 Block Description
5-13
3. Printer (µTP-58E-FU)
The Printer unit µTP-58E-FU prints data inputted in the serial RS-232C mode by the
thermal line-dot method. The dot density is 8 dots/mm and the maximum printing
speed is 20 mm/sec.
To connect a printer other than offered as the option, connect a printer meeting the
following specifications.
- Number of printing digits : 32 characters or more /1 line
- Max printing speed : 1 line/3 sec. or less
- Xon/off control : Paper run-out control
- Communication format;
Communication speed : 9600 bps
Data length : 8 bit
Parity : None
Stop bit :1 bit
To Next Page
Loading...
