Furuno NX-700B - Edit Station List; Default Setting; Test; Rcv Monitor

2.5 Setting of Service menu
2-24
4. Edit Station List
The NAVTEX station list can be edited. Stations can also be added or deleted.
The maximum number of registered stations is 300 including the preset stations.
Auto mode is performed on the basis of the position and range data (service area) of this
list.
Items to be edited are as follows:
1) NAVAREA: 01 to16, EXT
2) Station : The station name is set by up to 18 characters.
3) Latitude : Set the latitude of the station between 0 deg. and 83 deg. N/S
4) Longitude : Set the longitude of the station between 0 deg. and 180 deg. E/W.
5) Range : Set the service area of the station between 1 and 999 nm.
6) 518kHz : Specify the ID of stations A to Z for ID1, ID2, and ID3, respectively.
7) 490kHz : Specify the ID of stations A to Z for ID1, ID2, and ID3, respectively
8) 4209.5kHz : Specify the ID of stations A to Z for ID1, ID2, and ID3, respectively.
When all the above settings is complete, put the cursor on “Save data?” and click
[ENT] -> “Yes” to register the data.
5. Default Setting
See page 7-15 for details.
6. Test
See page 7-1 for details.
7. Rcv Monitor
See page 7-10 for details.
518kHz
[LIST] CHANGE FREQ
[ENT] EDIT [MENU] TRTUN TO MENU
[ ][ ] CHANGE NAVAREA
Nav Area 11
[ New ]
Sanya
Guangzhou
Fuzhou
Shanghai
Dalian
Jayapura
Ambon
Makassar
Jakarta
Otaru
Kushiro
M, - , -
N, - , -
O, - , -
Q, - , -
R, - , -
A, - , -
B, - , -
D, - , -
E, - , -
J, - , -
K, - , -
518kHz
[ENT] EDIT
[MENU] TRTUN TO MENU
[ ] UP
[ ] DOWN
Nav Area 11
11
NavArea
Sation
Latitude
Longitude
518kHz
490kHz
4209.5kHz
Range
Save data ?
0 00’ N
0 00’ E
ID1 : - ID2: - ID3: -
ID1 : - ID2: - ID3: -
ID1 : - ID2: - ID3: -
400nm
518kHz
[ENT] EDIT
[MENU] TRTUN TO MENU
[ ] UP
[ ] DOWN
Nav Area 11
11
NavArea
Sation
Latitude
Longitude
518kHz
490kHz
4209.5kHz
Range
Save data ?
43 19’ N
140 27’ E
ID1 : J ID2: - ID3: -
ID1 : - ID2: - ID3: -
ID1 : - ID2: - ID3: -
400nm
Otaru
Edit Station List New Edit
Edit
Delite
New