Furuno NX-700B - Initialize1, 2 Menu Tree 4.2.1 Program Ver-01.02; Program Ver-02.01

4.2 Initialize1, 2 Menu Tree
4-3
4.2 Initialize1, 2 Menu Tree
4.2.1 Program Ver-01.02
4.2.2 Program Ver-02.01
[MENU/ESC] Initialize 1
Sumless NMEA (Ignore, Receeive)
ACK Command (Ignore, Receeive)
Serviceman Test
Fill Memory
Rcv Mon+NMEA Test
DX RX Decision (Soft, Hard)
CRLF Check (On, Off)
Initialize 2
Delete All Msgs
All Clear
Demo Mode (On, Off)
System Test Results
View Nav Data
ZCZC Check (On, Off)
00 Msg Priority (00>B1>B2, B1>00>B2)
Printer Order (Old -> New, New)
Available Rcv Station List
Adjust Rx Unit
Rx Test
[MENU/ESC] Initialize 1
Sumless NMEA (Ignore, Receeive)
ACK Command (Ignore, Receeive)
Serviceman Test
Fill Memory
Rcv Mon+NMEA Test
DX RX Decision (Soft, Hard)
CRLF Check (On, Off)
Russia Mode (On, Off)
Initialize 2
Delete All Msgs
All Clear
Demo Mode (On, Off)
System Test Results
View Nav Data
ZCZC Check (On, Off)
00 Msg Priority (00>B1>B2, B1>00>B2)
Printer Order (Old -> New, New)
Available Rcv Station List
Adjust Rx Unit
Rx Test