114
6 Modifications to the basic vehicle
6.12 Handling of EV system
MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020
! Only print out complete sections from the current version
Equal potential ground cable
601426
DC interface (upper)
AC onboard (lower)
Charge inlet box
Battery E (upper)
Battery F (lower)
E-motor
PDU
A/C compressor
Battery A (upper)
Battery C (lower)
High voltage water heater A (right)
High voltage water heater B (middle)
High voltage water heater C (left)
Inverter
Battery B
Battery D
Ω
Content of the work on the high voltage equipment (1)
Resistance between the high voltage equipment and frame
Ω
Resistance between the high voltage equipment and frame
Content of the work on the high voltage equipment (2)
Ω
Resistance between the high voltage equipment and frame
Content of the work on the high voltage equipment (3)
If you worked on three or more high voltage units, add the report by signing and attaching it.
601981
To Next Page
Loading...