User nameCompany/branch name
Worker name/dateWork codeVehicle identification number
Travel distanceModel nameRegistration dateRegistration number
Check the following items and enter the appropriate values.
D1
㻰㻞
Name of the responsible person
Sign of the responsible person
Check that the high voltage equipment and the surrounding area are free from damages, that
all the connectors are connected, and that all the covers are installed using the specified parts.
C1
If you replace high voltage equipment (see D2),
check if the equal potential ground cable is securely connected by checking the following:
B1 Check the ground connection tester appearance and function for abnormalities.
B2 Check if the equal potential ground cable is installed exactly as instructed.
Resistance between the high voltage equipment and frame
Content of the work on the high voltage equipment (1)
Resistance between the high voltage equipment and frame
Content of the work on the high voltage equipment (2)
Resistance between the high voltage equipment and frame
Content of the work on the high voltage equipment (3)
If you worked on three or more high voltage units, add the report by signing and attaching it.
B3 The resistance measured is within the allowable range
(the
resistance
of
the
non-painted
portion
of
the
frame
shall
be
less
than
40
mΩ
at
2
A
or
higher).
㻼㼞㼛㼏㼑㼑㼐㻌㼠㼛㻌㼠㼔㼑㻌㼟㼑㼏㼛㼚㼐㻌㼜㼍㼓㼑
䃈䃈
䃈
䃈
Document any work related to the high voltage system:
Rework Report: eCanter
What work was performed?
1/2
To Next Page
Loading...