FUTABA 14SG S.Bus2 - Page 168

168
<Appendix>
FUTABA CORPORATION Phone: +81 475 32 6982, Facsimile: +81 475 32 6983
1080 Yabutsuka, Chosei-mura, Chosei-gun, Chiba-ken, 299-4395, Japan
©FUTABA CORPORATION 2012, 10 (1)
Logic mode
 AND:WhenbothswitchesareON,the
conditionisON.
 OR:WheneitherswitchisON,thecondition
isON.
 EX-OR:Whenthetwoswitchesarein
differentstates,theconditionisON.
Switch mode selection
1.Movethecursortothe[SINGLE]itemand
touchtheRTNbuttontoswitchtothedata
inputmode.
2.Selectthe[LOGIC]byscrollingthetouch
sensor.
*[LOGIC] display blinks.
3.TouchtheRTNbuttontochangetothe
logicswitchmode.
(Logicswitchsettingscreen)
Logic mode selection
1.Movethecursortothelogicmodeitem
andtouchtheRTNbuttontoswitchtothe
datainputmode.
2.Selectthelogicmodebyscrollingthe
touchsensor.[AND,ORorEX-OR]
*The mode display blinks.
3.TouchtheRTNbuttontochangetothe
logicmode.
Swich selection
1.Selecttherightandleftswitchrespectively.
(Refertothedescriptionattheprevious
page.)
 Toreturntothepreceedingscreen,move
thecursortothe[SWITCH]atthetopofthe
screenandtouchtheRTNbutton.
Logic switch (Condition Select function only)
The logic switch function lets you turn operation on and off by combining two switches.