50
<Functions of System Menu>
SYSTEM MENU
System Menu functions table
[TRAINER]: Starts and sets the trainer system.
[DISPLAY]: LCD and back-light adjustment
[USER NAME]: User name registration
[SOUND]: Turns off the buzzer.
[H/W SET]: H/W reverse, calibration and stick mode
[START SEL.]: Immediately, a model selection can be performed
[AUTO LOCK]: The automatic lock function of two kinds of touch sensors
[INFO]: Displays the program version, SD card information, product ID, and language selection.
[SBUS SERVO]: S.BUS servo setting.
The System Menu sets up functions of the
transmitter: This does not set up any model data.
● Call the system menu shown below by
touching the SYS button twice at the home
screen, etc.
● Select [SYSTEM MENU]
and return to the home
screen by touching the
RTN button.
Or a HOME/
EXIT button is pushed.
●Access setup screen
<SensorTouch™>
● Select the function you want to set and call
the setup screen by touching the RTN button.
Scrolling
● Moving cursor
RETURN
To Next Page
Loading...