FUTABA 14SG S.Bus2 - Page 18

18
<Before Use>
5. At the end of adjustment, re-install the side
cover and rear grips.
4. Use a small Phillips screwdriver to adjust the
spring strength as you prefer by turning the
adjusting screw of the stick you want to
adjust.
*Turning the screw clockwise increases the tension.
CAUTION: If you loosen the screw too much,
it can interfere with the operation of the
sticks internally.
The stick can be
adjusted to how
quickly it returns to
neutral.
+screwisclockwise.
Sticktensionmaximum Sticktensionminimum
+screwiscounter-clockwise.
Ascrewiskept
fromcomingout
fromaline.
Ascrewiskept
fromcomingout
fromaline.
*Thescrewwilltouchthecase.*Thescrewwilltouchthecase.
•Stick Tension (J1)
(Mode 1/2)
•Stick Tension (J2)
(Mode 2)
•Stick Tension (J4)
(Mode 1/2)
•Stick Tension (J3)
(Mode 1)