FUTABA T10PX - Page 107

107
Returntotableofcontents
Example
P1 :3%
P2 :5%
P3 :10%
P4 :16%
P5 :20%
P6 :40%
P7 :55%
P8 :68%
P9 :80%
123456789
Throttle curve
Adjustment method for Curve
3
When finished, return to the Racing menu screen by press-
ing the HOME button twice.
Screen change between throttle forward side curve and brake side curve.
You can move directly without returning the throttle (forward side) curve screen and the
brake curve screen to the "Curve" screen.
RACING MENU
(Preparation)
-Tap the curve type and select [Curve].
1
[Curve rate adjustment ]
2
[Add and remove points ]
Tap [
◀◀
] [
▶▶
] to move the cursor line over the point. Tap the rate
setting value to adjust the curve rate of each point.
You can add points up to 21 points. Tap [
◀
] [
▶
] or [
◀◀
] [
▶▶
],
move the cursor line to the position where you want to add / delete
points, and tap [ON / OFF].
Adjustment rate
- Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
Add points
- Select point with the [
◀
] or [
▶
]
buttons.
Add points
- Turn [ON]
Remove points
- Turn [OFF]
Curve rate
0~100
- Cannot change the curve rate
for neutral and endpoints.