FUTABA T10PX - Page 113

113
Returntotableofcontents
Adjustment buttons
- Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
Adjustment buttons
- Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
* Throttle trigger position
* Throttle trigger position
Adjustment buttons
- Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
* Throttle trigger position
2
("Low" and "High" return direction delay adjustment)
Tap the [Return] side of [Low] or [High]
value button. A warning is displayed say-
ing "Return speed will be slow. Please
be careful.". If you want to use the return,
tap [Close]. Value input buttons appear
on the screen. Use the [+] and [-] buttons to
adjust the return speed amount.
3
(Speed switching point adjustment)
When you want to change the "Low" and
"High" switching point, tap the [point 1] value
button. Value input buttons appear on the
screen, use the [+] or [-] buttons to move to
the point you want to set.
4
When finished, return to the Racing menu screen by pressing the HOME button twice.
1001
Servo operation is delayed.
Speed range
High: 1~100
Low: 1~100
Initial value :
100, there is no delay.
Point
Point
1
: 1~100
Initial value: 30
(Preparation)
-Tap the speed mode and select [3].
1
( "Low", "Middle", or "High" turn direction delay adjustment)
Tap the [Turn] side of [Low] or [High] value
button. Value input buttons appear on the
screen. Use the [+] and [-] buttons to adjust
the turn speed amount.
Adjustment method for 3 Speed mode
1001
Servo operation is delayed.
Speed range
High: 1~100
Middle: 1~100
Low: 1~100
Initial value :
100, there is no delay.
RACING MENU