FUTABA T10PX - Page 149

149
Returntotableofcontents
(Preparation)
- Use the switch select function (Linkage menu) to select the
switch.
(as desired)
- From the Program mixing screen Tap [Program mixing 1] -
[Program mixing 5] to use to move to the setting screen.
1
(Function ON/OFF)
Tap [1/2] at the upper right of the screen to display page 2.
Tap "Mixing" (ON) or (OFF) to select ON/OFF.
"OFF": Mixing function OFF
"ON": Mixing function ON
2
(Master/Slave channel setup)
Tap the [Master] or [Slave], and the channel setting screen
will be displayed. Tap on that channel to select.
To cancel, tap [Close].
3
(Telemetry mixing setup)
A telemetry sensor can be set on the [Master] on the mixing
side. For example, if you use the rotation sensor as the mas-
ter, you can mix the rotation speed and the slave channel.
Program composite adjustment
Setting
- Tap (ON)/(OFF).
The number of channels
varies depending on the
selected system.
Setting
- Tap channel.
MIXINGMENU
Setting
- Tap (ON)/(OFF).