109
ڀ ŪŲŃƗƒŃŷŤťůŨŃŲũŃŦŲűŷŨűŷŶ
Telemetry:Voltage[Ext.battery]
ŤƏƄƕƐŃƖƈƗŃ
1. Tap Alarm and choose from Buzzer, Voice,
and Inhibit.
2. Choose "Inhibit" for Vibrator if not using the
vibrator alarm. If using vibrator, choose one
of the three types.
3. Tap Limit [4.0 V].
$GMXVWWKHUDWHXVLQJWKHʈʈʈʆʆʆ
buttons.
Initial value: 4.0 V
Adjustment range: 0.0 V~100.0 V
:KHQWKHVFUHHQLVWDSSHGIRURQHVHFRQGWKHUDWHLVUHVHWWR
the initial value.
5. To terminate the input and return to the
original state, push the HOME/EXIT button.
Setsthevoltageon
whichthealarm
operates.
↓ The"down"arrow
willindicatethatan
alarmwillsoundwhen
thevoltagedropsto
belowthesetting.
Alarmischosenfrom
Buzzer,Voice,and
Inhibit.
AllowsSpeechtobe
turnedONorOFF.
ŏ7DSWKH>9ROWDJH@EXWWRQLQWKH7HOHPHWU\VFUHHQWR
call the setup screen shown below.
Max.andmin.values
sincethepower
wasturnedONwill
display.
Type1
Type2
Type3
"Vibrator"type
Ifthefollowingtypesareselected,thetransmitter
willvibrateduringthewarning.
Displaying data from the EXT
battery voltage port
,QWKLVVFUHHQWKH(;7EDWWHU\YROWDJHLV
displayed.
,QRUGHUWRXVHWKLVIXQFWLRQLWLV
necessary to connect External voltage connector of
56%56%
⇔
6%69
⇔
Battery
6%69PHDVXUHVWZREDWWHULHV7KHSRZHU
EDWWHU\FRQQHFWHGWRWZROLQHVLVGLVSOD\HGRQ(;7
92/7
*SBS-01Vmustbeinstalledintheaircraft.
*It cannot be used in FASST mode and S-FHSS mode.
2QO\UHFHLYHUYROWDJHDQG(;7YROWDJHFDQEHXVHGLQ
FASSTest12CH mode.
7KH)$667HVW&+7)+66PRGHFDQXVHDOOWKHWHOHPHWU\
functions.
Ext.battery
voltage
ŏ5HWXUQWR
Linkage menu