90
ڀ ŪŲŃƗƒŃŷŤťůŨŃŲũŃŦŲűŷŨűŷŶ
Targettime
Time:
Alarm:
LasttensecondsLasttwentyseconds
Oneshort
beep
Twoshort
beeps
Also
beep
Continuecounting
withdisplayinga
minus(-)sign.
Timer
Timer setting
The Timer function may be set for
DQ\GHVLUHGWLPHLHHQJLQHUXQWLPH
VSHFLILHGWLPHVIRUFRPSHWLWLRQVHWF
7ZRLQGHSHQGHQWWLPHUVDUHSURYLGHG
for your use. The timers are stored
LQGHSHQGHQWO\ZLWKHDFKPRGHOPHDQLQJ
WKDWZKHQ\RXVZLWFKEHWZHHQPRGHO
VHWXSVWKHWLPHUDVVRFLDWHGZLWKWKHQHZ
model is brought up automatically.
The timers may be set to start and stop
IURPWKHPRWLRQRIDQ\VZLWFKRUVWLFN
<RXPD\VHWWKH21DQG2))GLUHFWLRQV
freely. Each timer has a capacity of up to
PLQXWHVVHFRQGV
(DFKWLPHUPD\EHVHWIRUFRXQWGRZQRUFRXQWXSRSHUDWLRQ
ZLWKDWDUJHWWLPH
,IDWDUJHWWLPHLVVHWDQGWKHWLPHUUHDFKHVWKHVHWWLPHD
buzzer sound for each count is generated.
Atimeronthehomescreenstartsandstopsitscountdown
directlyfromtherewhentapped.Tappingandholdingthe
displaywillresetthetimer.
[Start/Stop] → Homescreen
Timer1 Timer2
ABuzzerorSpeech
canbechosen
ŸƓŃƗƌƐƈƕŒŧƒƚƑŃƗƌƐƈƕŃƖƈƏƈƆƗƌƒƑ
1. Tap the mode button and select the type of
timer.
2. Timer time setting.
Tap the Mode minutes or seconds button.
Value input buttons appear on the screen.
Use these buttons to set the timer time.
ŶƗƄƕƗŒŶƗƒƓŒŵƈƖƈƗŃƖƚƌƗƆƋŃƖƈƗƗƌƑƊ
1. Tap the Start/Stop/Reset SW "--" button to
call the <Switch> screen, and then select the
switch and its ON direction.
(For a detailed description of the selection
method, see [Switch selection method] at
the back of this manual. The timer switches
can be set for each condition.)
[Inhibit] →[Type1-4]
Ifitcarriesoutlikethis,
avibrationfunction
willwork.
ŏ6HOHFW>7LPHU@DWWKHOLQNDJHPHQXDQGFDOOWKHVHWXS
screen shown below.
ŏ5HWXUQWR
Linkage menu
OFF:TurningthepowerOFFandswitchingmodelswillresetthetimer.
ON:Previoustimerisputintomemoryandwillrestartfromwhereitstopped.
Elapsed:Minute-by-minute
alarmstartingfrom00:00
Remainder:Minute-by-
minutealarmcountingdown
fromadesignatedtime
Constant:Thealarm
doesnotstop
Onetime:Stopthe
alarmatonce