Futurecom VR - How to Create an EPR File

8G093X01 R5
VR Programming Guide
August 2022 Page 23 of 144
How To Create an EPR File
1. Establish communications with VR
2. Read the VR: select Repeater → Load Data from APX Repeater (F2)
3. Save the data as an EPR file: select File → EPR Files → Save EPR File
4. Enter a File comment (optional) and click OK
5. Choose File Encryption type and click OK
NOTE: If Custom Encryption type is selected, user must enter Password and Confirm.
6. Click OK for the successful EPR file save indication