Futurecom VR - Primary; Secondary Setup

8G093X01 R5
VR Programming Guide
August 2022 Page 115 of 144
Primary / Secondary Setup
9
Field Name
Range
Description
Notes
Primary
/ Secondary
Processing
All VR Channel
Types except for
Analog
Checkbox
(checked)
Enables / Disables the
Primary / Secondary
processing.
Analog VR
Channels
Checkbox
(checked)
Enables / Disables the
Primary / Secondary
Processing on analog
channels only.
Only accessible if
Primary/Secondary
Processing →All VR
Channel Types except
for Analog checked
Permanent Primary
Status
Checkbox
(unchecked)
If this box is checked the
VR will always be forced
into Permanent Primary
State.
Programming more than
one VR as a Permanent
Primary may result in
interference and loss of
communications.
Only accessible for
Digital channels if
Primary/Secondary
Processing → All VR
Channel Types except
for Analog checked.
Only accessible for
Analog channels if
Primary/Secondary
Processing → Analog
VR Channels checked.
Control
Checkbox
(unchecked)
The user may change the
VR status through the
DVRS menu options
(Control Head Menu
Options: DVRS→PM) or
through a long DVRS
menu button press, if
configured. (FRC
Configuration: MSU
Interface Setup→Long
DVRS Button Press)
Only accessible if
Primary/Secondary
Processing →All VR
Channel Types except
for Analog is checked
Behaviour
Text Field
(display only)
Describes permanent
primary behaviour of a
VR based on the
combination of Status
and Control fields
configuration.
Refer to
Table 9: Permanent
Primary Behaviours for
full list of Permanent
Primary Behaviours
Allow Secondary
VR to take over
OOR Primary
Checkbox
(unchecked)
If MSU connected to a
Primary VR becomes out
of range of the system, a
VR operating as
secondary will become
Primary and repeat local
PSUs and Systems
communication when this
option is enabled.
Same option ensures a
Secondary VR on its
Home system becomes
Primary when the current
Primary VR is from a
foreign system.
Only accessible if
Primary/Secondary
Processing → All VR
Channel Types except
for Analog is checked
9
Primary/Secondary operation is not applicable with Booster PA