8G093X01 R5
VR Programming Guide
August 2022 Page 55 of 144
How to Program NAC Linking Feature
Step 1: In the Repeater Channel Setup window, select the desired option for the VR channel
under the NAC Linking field. (scroll to far right).
Step 2: Use FRC copy data feature to quickly apply the same configuration any additional
channels.
NOTE: Only channels configured as Channel Type → Digital support this feature. For all other
channel types, this feature must be disabled.
Step 3: Add any restricted NACs to the PSU NAC Table. May include a range of NACs or
individual NACs.
Step 4: Enable the PSU "DVR Sync NAC Matching" field. This field can be found in the CPS
tool: Conventional Configuration → Conventional System → DVRS set of fields.
To Next Page
Loading...