Futurecom VR - Hardware; Software Info; Update Info

8G093X01 R5
VR Programming Guide
August 2022 Page 69 of 144
Hardware / Software Info
This screen is for information only and it displays the firmware revisions, model and serial number
of the VR.
Update Info
This screen is for information only
Field Name
Options /
Units
Description
Notes
Local Configuration ¤
Name
for future use
Timestamp
for future use
Access Time
alphanumeric
characters
Indicates the time on when
the repeater’s configuration
was programmed locally
CRC
for future use
Local Firmware ¤
Name
for future use
Timestamp
for future use
Access Time
alphanumeric
characters
Indicates the time on when
the repeater’s firmware was
updated locally
CRC
for future use
OTAP Configuration ¤
Name
alphanumeric
characters
Indicates template name of
the last configuration set
(DCD file) that was pushed
via Motorola Radio
Management.
Can give a dcd file a
Template name which
appears in DVRS Fileview in
RM → Config Data Name
Timestamp
alphanumeric
characters
Indicates the timestamp on
when the configuration set
was created
Format: YYYYMMDD-
HHMMSS
Access Time
for future use
CRC
alphanumeric
characters
Indicates the checksum of
the configuration set pushed
via Motorola Radio
Management
OTAP Firmware ¤
Name
alphanumeric
characters
Indicates name of the
firmware bundle that was
pushed via Motorola Radio
Management
Timestamp
alphanumeric
characters
Indicates the timestamp on
when the firmware bundle
was created
Format: YYYYMMDD-
HHMMSS
Access Time
for future use