8G093X01 R5
VR Programming Guide
August 2022 Page 34 of 144
Applying License to Template Files
FRC can apply license file to a template file (DPD or DCD) during offline editing. This DOES NOT
activate a feature but allows access to new configuration fields that may pertain to a licensed
feature.
Notes:
• Template file contains feature license status & the corresponding S/N at the time when
template file was created
• FRC verifies if the license file is applicable by checking the S/N against the S/N info in
the template file
• A user can apply the license file to the template, so FRC will allow them to configure the
features in that template that were not previously accessible
Procedures:
1. Load in a previously saved template file
2. Select File → Apply License
3. Follow prompt to pick up a license file
4. If S/N in license file does not match the saved S/N in template, FRC blocks importing the
license file and displays an error
5. If S/N in license file matches the saved S/N in template, FRC will proceeds and displays
a success message
To Next Page
Loading...