8G093X01 R5
VR Programming Guide
August 2022 Page 38 of 144
Applying Firmware to VR
The VR firmware can be flash upgraded/downgraded in the field by following the simple
instructions below:
1. Power up the VR.
2. Create a ‘Firmware’ folder on your computer
3. Download the selected Firmware upgrade file from the Futurecom website.
Home → Support → Documentation and Software → DVR-LX/DVR/VRX1000 →
Firmware Upgrades
4. Unzip the downloaded Firmware file and save the files in this folder.
5. Connect the powered-up DVR / VRX1000 to your computer USB port using the USB
programming cable.
6. Launch Futurecom Repeater Configurator (FRC)
7. Click on the Tools tab on FRC Launcher
8. Click on the Flash Downloader button will launch the Flash Downloader Utility (as shown
below)
To Next Page
Loading...