8G093X01 R5
VR Programming Guide
August 2022 Page 58 of 144
How to Program Talkgroup Proxying
FRC - VR Programming
Step 1: Open the Digital Setup window.
Step 2: Confirm the Enforce TG Matching field is unchecked.
CPS - PSU Programming for Talkgroup Proxying
Step 1: Create a new ASTRO Talkgroup List
• Conventional Configuration → ASTRO Talkgroup List → New List
• New List → Talkgroup List → add a record for each PSU talkgroup
Step 2: Update the Conventional Personality, Conventional Personality
• Signaling → ASTRO → ASTRO Rx Unmute Rule → Selective Squelch
• ASTRO Talkgroup → Talkgroup → checked
• ASTRO Talkgroup → Talkgroup List → New List
• ASTRO Talkgroup → Selection Type → Strapped (preferred over Selectable)
• Frequency Options → create a record for every PSU talkgroup
▪ Each record will have same Rx/Tx frequency info
▪ ASTRO Talkgroup ID → select the appropriate PSU talkgroup for each
record
Step 3: Update the Zone Channel Assignment
• Add a new VR channel record for each PSU talkgroup
To Next Page
Loading...