Futurecom VR - MSU Interface Setup

8G093X01 R5
VR Programming Guide
August 2022 Page 104 of 144
MSU Interface Setup
Field Name
Range
Description
Notes
VR Language
Selection
‘English’
‘French’
Specifies the VR Language
Selection, which should match the
MSU language selection.
If the MSU is using a
different language selection
besides English or French,
the VR should be set up for
English.
Number of Impolite
Retries
0 to 15 (5)
Specifies the number of impolite
retries sent by the VR to the
System upon receiving an
Emergency Alarm from the PSU.
Applicable to Conventional
MSU Mode. It is
recommended that a longer
sequence is programmed in
the VR compared to what is
programmed in the PSU.
Number of Polite
Retries
0 to 15 (5)
Specifies the number of polite
retries sent by the VR to the
System upon receiving an
Emergency Alarm from the PSU.
Applicable to Conventional
MSU Mode. It is
recommended that a longer
sequence is programmed in
the VR compared to what is
programmed in the PSU.
Number of
Emergency Retries
0 to 15 (5)
Specifies the number of
Emergency retries sent by the VR
to the System upon receiving an
Emergency Alarm from the PSU.
Applicable to Trunked MSU
Mode
Fast Retries Timer
500 to 1500
(750) ms
Amount of time the VR will wait for
a response from Trunking system
to a previous request.
Slow Retries Timer
1000 to 5000
(3000) ms
Amount of time the VR will wait to
allow conventional system to
respond to a previous request.
Response Pending
Timer
500 to 2000
(750) ms
Amount of time the VR will wait for
a response. VR will stop retries
but hold off from sending other
Proxy Requests until it receives a
response or the timer expires.
VR UI
Menu Timeout
0 to 120 (5) s
Specifies the VR Selection Menu
Timeout
0 = No Timeout
Short DVRS Button
Press
‘VR Menu’
‘VR Activation /
Deactivation’
Specifies the Short DVRS Button
press selection assignment.
VR Menu: Provide access to
multiple VR functions on the
mobile control head display.
VR Activation/Deactivation: Toggle
active state of VR.