8G093X01 R5
VR Programming Guide
August 2022 Page 24 of 144
How To Create a DPD File
To create a DPD file, there are two options: create a new file or modify an existing file.
NOTE: Remember to follow programming sequence outlined in VR Programming Guidelines to
ensure the MSU and VR are synchronized.
Creation of New File
1. Establish communications with VR
2. Read the VR: select Repeater → Load Data from APX Repeater (F2)
3. Make configuration changes (as needed) for this new DPD file
4. Save the data as DPR: select File → DPD Files (Templates)
→
Save DPD File
5. Enter data into Save window and click SAVE
6. Choose File Encryption type and click OK
NOTE: If Custom Encryption type is selected, user must enter Password and Confirm.
Modify an Existing File
1. Select File → DPD Files → Load DPD File
To Next Page
Loading...