8G093X01 R5
VR Programming Guide
August 2022 Page 59 of 144
• Channels → Personality → Conventional Personality for each record
• Channels → Conventional Frequency Option → select the appropriate PSU
talkgroup for each record
Additional Notes
1. Deployment: It is recommended to set the MSU to a talkgroup that is never used to
ensure the talkgroup is always available when needed. If it is set to a commonly used
talkgroup, when a user is in range and presses PSU PTT, they would get a deny tone if
the talkgroup is busy.
2. Programming: For Step 2, Strapped is the preferred configuration. However, if desired,
Selectable may be set instead and then Step 3 is not required. Please note that the
Selectable option requires the end user to follow a two-step process to change
talkgroups: change selector button for PSU channel, and then enter menu to select
talkgroup.
How to Program Talkgroup Translation
FRC - VR Programming
Step 1: Open the Digital Setup window.
Step 2: Confirm that the Enforce TG Matching field is unchecked.
To Next Page
Loading...