8G093X01 R5
VR Programming Guide
August 2022 Page 62 of 144
How to Program Unit ID Translation
FRC- VR Programming
Step 1: Open the Digital Setup window.
Step 2: Confirm that the Enforce TG Matching field is unchecked.
Step 3: Open the Repeater Channel Setup window.
Step 4: Scroll to the far right and set the UID TRNSL. Field to Yes for each required channel.
Additional Notes
1. Programming- only applicable to digital channels.
2. Programming- overrides Talkgroup Proxying and Translation features.
3. Programming- incompatible with PSU Authentication feature.
To Next Page
Loading...