Futurecom VR - Page 64

8G093X01 R5
VR Programming Guide
August 2022 Page 64 of 144
This field will be marked red (invalid) if it:
• Points to MSU channel, which TG
Mode is "Disabled"
• Points to a ‘VR Disabled’ zone and
channel
• Points to an MSU channel, which
does not have the current VR channel
in the list of allowed VR channels
Blue, Italic,
Bold text in
Notes column
Feature license required for this field to
be editable.
Repeater Channel Setup → PSU Scan
Feature License - PSU Conventional
Scan required for this field to be editable.
Refer to VR Ordering Guides for order
code
Field Name*
VR model specific fields
Mobile Radio Channel → Mob. Det*
Identified as *VRX1000 ONLY field in the
Notes column
Field Name ¤
Fields that are only applicable to the
connected VR
These fields will NOT be propagated in
the template file (DPD or DCD) or Radio
Manager
These fields are greyed out during offline
editing except for Hardware/Software
Info screen
VR Common Setup → This VR
ID¤
ID of the connected VR
Field Name ●
Fields that are only applicable to the
installed FRC and stored locally on its
PC
These fields will NOT be propagated in
the template file (DPD or DCD)
Ports → COM Port ●
COM Port setting specific to the version of
FRC installed on the PC
Greyed Out
(Disabled)
Fields
Greyed out fields cannot be edited.
Two scenarios exist:
1) Parameters displayed are ignored by
VR either due to licensing, or
configuration of other fields.
2) Parameters displayed are fixed
based on VR unit hardware/software.
Examples:
1) Observed with GPS Driven
Deactivation
2) Observed with Hardware/Software
info