Futurecom VR - Page 67

8G093X01 R5
VR Programming Guide
August 2022 Page 67 of 144
Field Name
Options /
Units
Description
Notes
VR User Text
Maximum 32
alphanumeric,
characters
Informational text to differentiate
this configuration from other
Repeater installations such as
County name, Chief’s vehicle, Fire
Engine 49 etc.
Set Repeater
Password
Set Password for the Repeater
Reset Repeater
Password
Reset the Repeater Password.
Tier Level*
Tier 1
Tier 2
Tier 3
VRX1000 Operation Mode
*VRX1000 ONLY field
See table below
Feature Licenses
Authentication
¤
Enabled /
Disabled
Showing the status of the Feature
License required to enable
Authentication functionality
Feature License -
Authentication required to
enable this feature. Refer to
VR Ordering Guides
RM-OTAP ¤
Enabled /
Disabled
Showing the status of the Feature
License required to enable Over
the Air Programming functionality
Feature License - RM-
OTAP required to enable this
feature. Refer to VR Ordering
Guides
PSU
Conventional
Scan ¤
Enabled /
Disabled
Showing the status of the Feature
license required to enable PSU
Scan functionality.
Feature License - PSU
Conventional Scan required
to enable this feature. Refer
to VR Ordering Guides
SmartConnect
Extension ¤
Enabled /
Disabled
Showing the status of the Feature
license required to enable
SmartConnect In-Vehicle Range
Extension
Feature License –
SmartConnect In-Vehicle
Range Extension required
to enable this feature. Refer
to VR Ordering Guides
GPS Driven
Deactivation ¤
Enabled /
Disabled
Showing the status of the Feature
license required to enable GPS
Driven Deactivation
Feature License – GPS
Driven Deactivation
required to enable this
feature. Refer to VR Ordering
Guides