DMC-21x3 Accessories Chapter 14 DB-28104• 81
Chapter 14 DB-28104
____________________________________________________________________________
Introduction
A family of feedback devices, commonly called Sin/Cosine encoders or 1 Volt peak-peak
encoders are becoming increasingly popular due to their cost, ease of use, and performance.
Galil Motion Control has developed an interface board for the DMC-21x2/21x3 series motion
controllers that give the engineer the ability to close the servo loop around these feedback
devices. Figure 1 shows the DB-28104.
Figure38 DB-28104
To Next Page
Loading...
