Garmin GPSmap 585 Plus - Creating Marks and Waypoints; Editing Saved Waypoints; Man Overboard (MOB) Function; Navigating to Waypoints

GPSMAP
®
585 Plus 33
Creating a Waypoint on a Sonar Screen Using a
Different Location
1 Select or to pause the sonar.
2 Using the arrow keys, select a location.
3 Select an option:
• To create a mark, select MARK.
• To create a waypoint, hold MARK.
4 If necessary, edit the mark or waypoint information.
Creating a Mark or Waypoint
1 Select an option:
• To create a mark at the cursor, select MARK/WPT.
• To create a waypoint at the cursor, hold MARK/WPT.
• To create a mark at your boat position, with the cursor invisible and no
menu shown, select MARK/WPT.
• To create a waypoint at your boat position, with the cursor invisible and
no menu shown, select MARK/WPT.
2 If necessary, edit the mark or waypoint information.
Editing a Saved Waypoint
1 Select User Data > Waypoints.
2 Select a waypoint.
3 Select Edit Waypoint.
4 Select an option:
• To add a name, select Name, and enter a name.
• To change the symbol, select Symbol.
• To change the depth, select Depth.
• To change the water temperature, select Water Temp..
• To change the comment, select Comment.
• To move the position of the waypoint, select Position.
Marking and Navigating to a Man Overboard Location
From any screen, select MARK > Man Overboard > Yes. The shnder
sets a direct course back to the location.
Navigating to a Waypoint
1 Pan the waypoint map to nd the waypoint.
2 Place the center of the cursor on the center of the waypoint symbol. The
waypoint name appears on the screen.
3 Select the waypoint.
4 Select Navigate To > Go To.
Measuring Distance on the Waypoint Map
You can measure the distance between two locations.
1 From the waypoint map, begin panning .
2 Select SELECT > Measure Distance.
The distance and other data appear on the screen.
Deleting a Waypoint or an MOB
1 Select User Data > Waypoints.
2 Select a waypoint or an MOB.
3 Select Delete > OK.