Garmin INSTINCT E - VIRB Remote; Controlling a VIRB Action Camera; Controlling a VIRB Action Camera During an Activity; Xero Laser Location Settings

Map 23
5 Press GPS, and select an option:
• To send an SOS message, select Initiate SOS.
NOTE: You should only use the SOS function in a
real emergency situation.
• To send a text message, select Messages >
New Message, select the message contacts,
and enter the message text or select a quick text
option.
• To send a preset message, select Send Preset,
and select a message from the list.
• To view the timer and distance traveled during an
activity, select Tracking.
VIRB Remote
The VIRB remote function allows you to control your
VIRB action camera using your device.
Controlling a VIRB Action Camera
Before you can use the VIRB remote function, you must
enable the remote setting on your VIRB camera. See the
VIRB Series Owner’s Manual for more information.
1 Turn on your VIRB camera.
2 Pair your VIRB camera with your Instinct watch
(Pairing Your Wireless Sensors, page21).
The VIRB glance is automatically added to the
glance loop.
3 Press UP or DOWN from the watch face to view the
VIRB glance.
4 If necessary, wait while your watch connects to your
camera.
5 Select an option:
• To record video, select Start Recording.
The video counter appears on the Instinct screen.
• To take a photo while recording video, press
DOWN.
• To stop recording video, press GPS.
• To take a photo, select Take Photo.
• To take multiple photos in burst mode, select
Take Burst.
• To send the camera to sleep mode, select Sleep
Camera.
• To wake the camera from sleep mode, select
Wake Camera.
• To change video and photo settings, select
Settings.
Controlling a VIRB Action Camera During an
Activity
Before you can use the VIRB remote function, you must
enable the remote setting on your VIRB camera. See the
VIRB Series Owner’s Manual for more information.
1 Turn on your VIRB camera.
2 Pair your VIRB camera with your Instinct watch
(Pairing Your Wireless Sensors, page21).
When the camera is paired, a VIRB data screen is
automatically added to activities.
3 During an activity, press UP or DOWN to view the
VIRB data screen.
4 If necessary, wait while your watch connects to your
camera.
5 Hold MENU.
6 Select VIRB.
7 Select an option:
• To control the camera using the activity timer,
select Settings > Recording Mode > Timer Start/
Stop.
NOTE: Video recording automatically starts and
stops when you start and stop an activity.
• To control the camera using the menu options,
select Settings > Recording Mode > Manual.
• To manually record video, select Start Recording.
The video counter appears on the Instinct screen.
• To take a photo while recording video, press
DOWN.
• To manually stop recording video, press GPS.
• To take multiple photos in burst mode, select
Take Burst.
• To send the camera to sleep mode, select Sleep
Camera.
• To wake the camera from sleep mode, select
Wake Camera.
Xero Laser Location Settings
Before you can customize laser location settings,
you must pair a compatible Xero device (Pairing Your
Wireless Sensors, page21).
Hold MENU, and select Sensors & Accessories > XERO
Laser Locations > Laser Locations.
During Activity: Enables the display of laser location
information from a compatible, paired Xero device
during an activity.
Share Mode: Allows you to share laser location
information publicly or broadcast it privately.
Map
represents your location on the map. Location names
and symbols appear on the map. When you are
navigating to a destination, your route is marked with a
line on the map.
y Map navigation (Panning and Zooming the Map,
page23)
y Map settings (Map Settings, page24)
Panning and Zooming the Map
1 While navigating, press UP or DOWN to view the
map.
2 Hold MENU.
3 Select Pan/Zoom.
4 Select an option:
• To toggle between panning up and down,
panning left and right, or zooming, press GPS.
• To pan or zoom the map, press UP and DOWN.
• To quit, press BACK.