Garmin INSTINCT E - Creating a Course on Garmin Connect; Sending a Course to Your Device; Viewing or Editing Course Details; Projecting a Waypoint

Navigation 33
9 Select Done > Do Course.
Navigation information appears.
10 Press GPS to begin navigation.
Creating a Course on Garmin Connect
Before you can create a course on the Garmin Connect
app, you must have a Garmin Connect account (Garmin
Connect, page25).
1 From the Garmin Connect app, select .
2 Select Training & Planning > Courses > Create
Course.
3 Select a course type.
4 Follow the on-screen instructions.
5 Select Done.
NOTE: You can send this course to your device
(Sending a Course to Your Device, page33).
Sending a Course to Your Device
You can send a course you created using the Garmin
Connect app to your device (Creating a Course on
Garmin Connect, page33).
1 From the Garmin Connect app, select .
2 Select Training & Planning > Courses.
3 Select a course.
4 Select .
5 Select your compatible device.
6 Follow the on-screen instructions.
Viewing or Editing Course Details
You can view or edit course details before you navigate
a course.
1 From the watch face, press GPS.
2 Select an activity.
3 Hold MENU.
4 Select Navigation > Courses.
5 Press GPS to select a course.
6 Select an option:
• To begin navigation, select Do Course.
• To create a custom pace band, select PacePro.
• To view the course on the map and pan or zoom
the map, select Map.
• To begin the course in reverse, select Do Course
in Reverse.
• To view an elevation plot of the course, select
Elevation Plot.
• To change the course name, select Name.
• To edit the course path, select Edit.
• To delete the course, select Delete.
Projecting a Waypoint
You can create a new location by projecting the
distance and bearing from your current location to a
new location.
NOTE: You may need to add the Project Wpt. app to the
activities and apps list.
1 From the watch face, press GPS.
2 Select Project Wpt�.
3 Press UP or DOWN to set the heading.
4 Press GPS.
5 Press DOWN to select a unit of measure.
6 Press UP to enter the distance.
7 Press GPS to save.
The projected waypoint is saved with a default name.
Navigation Settings
You can customize the map features and appearance
when navigating to a destination.
Customizing Navigation Data Screens
1 From the watch face, press GPS.
2 Select Navigation > Data Screens.
3 Select an option:
• Select Map > Status to turn on or off the map.
• Select Map > Data Field to turn on or off a data
field that shows routing information on the map.
• Select Up Ahead to turn on or off information
about upcoming course points.
• Select Elevation Plot to turn on or off the
elevation plot.
• Select a screen to add, remove, or customize.
Heading Settings
You can set the behavior of the pointer that appears
when navigating.
Hold MENU, and select Navigation > Type.
Bearing: Points in the direction of your destination.
Course: Shows your relationship to the course line
leading to the destination.
Setting Navigation Alerts
You can set alerts to help you navigate to your
destination.
1 Hold MENU.
2 Select Navigation > Alerts.
3 Select an option:
• To set an alert for a specified distance from your
final destination, select Final Distance.
• To set an alert for the estimated time remaining
until you reach your final destination, select Final
ETE.
• To set an alert when you stray from the course,
select Off Course.
• To enable turn-by-turn navigation prompts, select
Turn Prompts.
4 If necessary, select Status to turn on the alert.
5 If necessary, enter a distance or time value, and
select .