24
Using the LCD Monitor
1. Turn the camera on by pressing the POWER
button.
2. Set the mode dial to [ ].
By default, the LCD monitor setting is "ON".
3. Compose the picture in the LCD monitor.
4. Press the shutter button down halfway (the
camera adjusts the exposure and the focus),
then press it down fully.
The viewfinder LED indicator lights red while the camera is processing a
captured image.
Note:
In still image capture mode, AF LED is activated at Auto and Macro mode
when the luminance value is under 6.
LCD Monitor Display (Capture Mode)
The [ ] Display button can select display format. Whether in “Still Image” or
“Movie” mode, preview image with full OSD is displayed.
OSD (on-screen-display) full display OSD display OFF LCD monitor OFF
Note:
The image in the LCD monitor darkens in strong sunlight or bright light. This
is not a malfunction.
Using the LCD monitor for an extended period of time will decrease the number
of images you can take. To increase the shots and conserve battery power,
it is recommended to turn the LCD monitor off and use the viewfinder instead.
To Next Page
Loading...
Need help?
General