48
PLAYING BACK IMAGES [ ]
Playing Back Photographed Images
(Single-Frame Playback)
Play back photographed still images one image at a time.
1. Set the mode dial to [
] and power on the camera.
The last recorded image appears on the LCD
monitor.
2. Rotate the COMMAND dial or press the c or d
button to advance to the next frame or to go back
one frame.
Rotate clockwise: Display the next image.
Rotate counter-clockwise: Display the previous
image.
Note:
Press the SET button to playback the voice memo data.
Images can be rotated by pressing theeorf button during playback. Pressing thee button
rotates an image counter-clockwise, and pressing the f button rotates it clockwise.
If no images are in the SD Memory Card, the message of “NO IMAGE” is displayed on the
LCD monitor.
You can also playback your images on a TV screen. First connect one end of the A/V cable
to the A/V out terminal of the camera. Then connect the other end to the A/V input socket
of the TV. Set the mode dial to (playback) and then turn the TV and camera on.
Make sure to turn off the camera before connecting or disconnecting with the A/V cable.
To Next Page
Loading...
Need help?
General